Licensed and Insured Independent Pros
Extraction contractors we refer are independent local businesses that carry their own license and insurance. Ask to see proof of insurance on arrival, and a reputable crew will have it handy.
Carpet that squishes when you step on it means the pad is full, and no box fan is going to fix that. Real extraction gear pulls water out of carpet, pad and floor seams far faster than any fan can dry it.
Our referral line connects Eielson AFB callers with independent, licensed and insured contractors who run truck-mounted and portable extractors. The crew quotes the job in writing before the wand touches the floor.

Extraction is a pure equipment job: the power of the machine and the right tool head decide how much water comes out.
Extraction contractors we refer are independent local businesses that carry their own license and insurance. Ask to see proof of insurance on arrival, and a reputable crew will have it handy.
Expect a written estimate listing square feet of carpet extracted, any pad disposal and equipment rental days. Many contractors bill the insurer directly once you have a claim number.
Wet pad starts to sour within a day or two, so speed matters more here than almost anywhere. The dispatcher confirms an actual arrival window with a nearby crew before you hang up.
Crews bring truck-mounted units with far more vacuum lift than any rental, plus portable extractors for high-rise and tight units. Stand-on and weighted tools press body weight into the carpet so the pad gives up its water, not only the top fibers.
Each gallon removed by the extractor is a gallon that never has to be evaporated and captured by a dehumidifier. Pulling water out as liquid is far quicker than waiting for fans to turn it into vapor. Skip that step and the drying phase drags on for days longer than it needs to.
A wet vac works on the surface fibers and has nowhere near the suction of a truck-mounted unit. It also cannot reach the pad, which is where most of the water sits. People run one for hours and still have carpet that squishes.
Take a refrigerator ice-maker line that leaked into wall-to-wall carpet overnight. That is clean water, so the crew may float the carpet: lift it off the tack strip, pull the soaked pad, extract the carpet in place and set drying underneath it.
Laminate is trickier. In a rental apartment where water seeped under the planks, it hides in the foam underlayment and against the subfloor. Extraction mats and meters show how far it traveled, and swollen boards usually come up.
Rule of thumb from the field: carpet in clean water can often be saved, but the pad underneath is usually thrown out and replaced. Pad is cheap; carpet is not.
Time matters too: clean water left sitting for days in a warm house picks up bacteria, which shrinks the list of what can be saved. It is one more reason to call for extraction right away.

Each material holds water differently, so each one gets a different tool and technique.

Slow, overlapping passes with a weighted head continue until the clear wand shows almost no water. Wet pad is usually cut out and bagged, then the carpet is relaid once dry.
With clean water, crews often float the carpet: release it from the strip and blow air under it to dry it in place. It keeps a perfectly good carpet from going to the landfill.
Panel mats seal against the wood and draw water up from between the boards and out of the subfloor. When caught early, it often stops solid hardwood from cupping.
With click-together planks, water runs underneath and pools on the subfloor out of sight. Crews read moisture across the floor, pull planks where it is wet and extract the subfloor directly.
Sofas, chairs and rugs get extracted with smaller hand tools sized for fabric. Wool and handmade rugs usually get sent to a rug cleaning plant for full washing.
After extraction, the tech checks readings across the floor and up the walls to see where water wicked. Those readings tell the crew where the drying equipment should go.
Let the dispatcher know the flooring type, the size of the wet area and the source of the leak. We route you to the nearest independent extraction crew and give you an arrival window.
The crew pulls up with a truck mount or portable extractor, wands, weighted tools and moisture meters.
First the tech identifies the water source and category, measures the wet area and decides what stays, then puts the quote in writing.
When the extraction is finished, you see the final readings, the drying setup and what was removed before you sign off.

The fridge ice-maker line let go overnight and the living room carpet was wet from the kitchen to the far wall. The contractor I was connected with pulled the pad, extracted the carpet with a stand-on tool and saved the carpet itself. No smell afterward, which I was worried about.
I rent an apartment and water came in under the laminate from the unit's water heater closet. Through the referral line we got a crew that metered the floor, lifted the soaked planks and extracted the subfloor.
I ran my wet vac for hours and the carpet was still squishy. The contractor showed up with a truck mount and got more out of that room in a few passes than I did all night.
The washer drain hose came loose and water ran under the hallway hardwood while we were at work. The crew from the referral service set vacuum mats across the wood and ran them for hours. The floor cupped a little and then flattened back out as it dried.
Often, if it got wet from a clean source like a supply line or ice-maker and is extracted quickly. The pad below is normally thrown out, since it traps water and smell.
If sewage or floodwater soaked it, the carpet generally has to go.
A shop vac only pulls from the surface and has a fraction of the lift of a professional truck mount. The pad and subfloor are where most water lives, and a wet vac does not get there.
Professional crews pair a powerful extractor with weighted tools that squeeze the pad.
For one or two rooms, the extraction often wraps up in a few hours. The drying that follows is a separate step and usually runs a few days.
After checking the size of the wet area, the crew can tell you how long it should take.
Not if the pad is removed, the carpet is extracted thoroughly and it dries quickly. A smell usually means water stayed in the pad or subfloor for too long.
You can ask the crew if an antimicrobial treatment makes sense for your floor.
Extraction is the vacuum step that removes liquid water from carpet, pad and flooring. Drying is what follows, with dehumidifiers and air movers removing what is left behind.
The better the extraction, the shorter the drying phase.
The extraction contractors we refer are local, so the truck mount is not hours away.
For upper-floor apartments and condos, crews bring portable units since a truck hose will not reach. Houses and small storefronts usually get a truck mount parked right outside.

A dispatcher will route you to a nearby extraction crew.
Call +1-877-637-9008The faster the pad and carpet are extracted, the more you save. Call now for a local crew.