Licensed and Insured Independent Pros
Extraction contractors we refer are independent local businesses that carry their own license and insurance. Ask to see proof of insurance on arrival, and a reputable crew will have it handy.
Carpet that squishes when you step on it means the pad is full, and no box fan is going to fix that. Real extraction gear pulls water out of carpet, pad and floor seams far faster than any fan can dry it.
Our referral line connects Southlake callers with independent, licensed and insured contractors who run truck-mounted and portable extractors. You get a written quote before the extraction wand ever hits the carpet.

With extraction, the machine and the tool attachment do the heavy lifting, and the right combination saves days of drying.
Extraction contractors we refer are independent local businesses that carry their own license and insurance. Ask to see proof of insurance on arrival, and a reputable crew will have it handy.
The estimate spells out square footage extracted, pad removal if needed and any equipment left behind. Many contractors bill the insurer directly once you have a claim number.
Carpet pad sitting in water begins to smell fast, which makes a quick response the whole ballgame. The dispatcher confirms an actual arrival window with a nearby crew before you hang up.
Crews bring truck-mounted units with far more vacuum lift than any rental, plus portable extractors for high-rise and tight units. Stand-on and weighted tools press body weight into the carpet so the pad gives up its water, not only the top fibers.
Each gallon removed by the extractor is a gallon that never has to be evaporated and captured by a dehumidifier. Pulling water out as liquid is far quicker than waiting for fans to turn it into vapor. Leave it out and the drying phase stretches for days.
A shop vac falls short because it only pulls from the surface and has a fraction of the lift of a truck mount. It also cannot reach the pad, which is where most of the water sits. People run one for hours and still have carpet that squishes.
Take a refrigerator ice-maker line that leaked into wall-to-wall carpet overnight. Since the water is clean, the crew can often float the carpet, which means releasing it from the tack strip, removing the pad and extracting the carpet itself.
Laminate is a tougher case: when water runs under the planks in a rental unit, it sits in the underlayment where you cannot see it. Extraction mats and meters show how far it traveled, and swollen boards usually come up.
Field rule: clean-water carpet is often saved, while the pad below is usually tossed. Pad costs little to replace compared to carpet.
Time matters too: clean water left sitting for days in a warm house picks up bacteria, which shrinks the list of what can be saved. That is one more reason to get the extractor in early.

Each material holds water differently, so each one gets a different tool and technique.

The crew makes slow overlapping passes with a weighted tool until the wand stops pulling water. The soaked pad is typically cut out and removed, with the carpet reinstalled after drying.
For a clean-water leak, the crew can pull the carpet off the tack strip, slide air underneath and dry it in place. It keeps a perfectly good carpet from going to the landfill.
Panel mats seal against the wood and draw water up from between the boards and out of the subfloor. When caught early, it often stops solid hardwood from cupping.
Water slips under click-lock planks and sits on the subfloor where you cannot see it. Crews read moisture across the floor, pull planks where it is wet and extract the subfloor directly.
Sofas, chairs and rugs get extracted with smaller hand tools sized for fabric. Wool and handmade rugs often go out to a rug plant for proper washing and drying.
Once the water is out, the tech maps moisture across the floor and along the base of the walls. Those readings tell the crew where the drying equipment should go.
Tell the dispatcher what got wet, what flooring you have and where the water came from. We route you to the nearest independent extraction crew and give you an arrival window.
The crew pulls up with a truck mount or portable extractor, wands, weighted tools and moisture meters.
First the tech identifies the water source and category, measures the wet area and decides what stays, then puts the quote in writing.
When the extraction is finished, you see the final readings, the drying setup and what was removed before you sign off.

The fridge ice-maker line let go overnight and the living room carpet was wet from the kitchen to the far wall. The local contractor from the referral line pulled the wet pad, stood on some kind of weighted tool for an hour and kept our carpet. There was no musty smell later, which was my biggest worry.
I rent an apartment and water came in under the laminate from the unit's water heater closet. The crew my landlord and I were connected with found it with a meter, pulled the wet planks and extracted the subfloor.
I ran my wet vac for hours and the carpet was still squishy. The extractor the contractor brought pulled more water in a few minutes than I got in an evening.
The washer drain hose came loose and water ran under the hallway hardwood while we were at work. The contractor we reached through the referral line laid suction mats over the boards and ran them for most of the day. The boards cupped slightly, then settled flat again once everything was dry.
Often, if it got wet from a clean source like a supply line or ice-maker and is extracted quickly. The pad below is normally thrown out, since it traps water and smell.
If sewage or floodwater soaked it, the carpet generally has to go.
A shop vac only pulls from the surface and has a fraction of the lift of a professional truck mount. The pad and subfloor are where most water lives, and a wet vac does not get there.
Professional crews pair a powerful extractor with weighted tools that squeeze the pad.
For one or two rooms, the extraction often wraps up in a few hours. Drying afterward is a separate step that can take several days.
The crew will give you a time estimate after looking at the wet area.
Not if the pad is removed, the carpet is extracted thoroughly and it dries quickly. A smell usually means water stayed in the pad or subfloor for too long.
You can ask the crew if an antimicrobial treatment makes sense for your floor.
Extraction physically pulls liquid water out of carpet, pad and floors with powerful vacuums and tools. Drying comes next, using dehumidifiers and air movers to remove the moisture that is left.
Good extraction makes drying much shorter.
Because the crews are based near Southlake, the extraction truck does not have far to travel.
Upstairs condos and apartments often need portable extractors because hoses cannot reach from the street. Houses and small storefronts usually get a truck mount parked right outside.

Call and we will connect you with a local extraction crew.
Call +1-877-637-9008The faster the pad and carpet are extracted, the more you save. Call now for a local crew.