Licensed and Insured Independent Pros
Extraction contractors we refer are independent local businesses that carry their own license and insurance. Ask at the door if you want to see the paperwork; good crews keep it in the truck.
Carpet that squishes when you step on it means the pad is full, and no box fan is going to fix that. A proper extractor physically pulls that water out of carpet and pad, which is much faster than waiting for it to evaporate.
Our referral line connects Hydro callers with independent, licensed and insured contractors who run truck-mounted and portable extractors. The crew quotes the job in writing before the wand touches the floor.

With extraction, the machine and the tool attachment do the heavy lifting, and the right combination saves days of drying.
Extraction contractors we refer are independent local businesses that carry their own license and insurance. Ask at the door if you want to see the paperwork; good crews keep it in the truck.
Expect a written estimate listing square feet of carpet extracted, any pad disposal and equipment rental days. Many contractors bill the insurer directly once you have a claim number.
Wet pad starts to sour within a day or two, so speed matters more here than almost anywhere. Our dispatcher confirms a real arrival window with a crew near Hydro while you are on the phone.
Expect a truck-mounted extractor with serious vacuum lift, and portable units for upper floors and apartments. Stand-on and weighted tools press body weight into the carpet so the pad gives up its water, not only the top fibers.
Each gallon removed by the extractor is a gallon that never has to be evaporated and captured by a dehumidifier. Extraction removes water in liquid form, which is many times faster than turning it into vapor with air movers. Leave it out and the drying phase stretches for days.
A wet vac works on the surface fibers and has nowhere near the suction of a truck-mounted unit. It also never reaches the pad, and that is where most of the water is hiding. People run one for hours and still have carpet that squishes.
Take a refrigerator ice-maker line that leaked into wall-to-wall carpet overnight. That is clean water, so the crew may float the carpet: lift it off the tack strip, pull the soaked pad, extract the carpet in place and set drying underneath it.
Laminate is a tougher case: when water runs under the planks in a rental unit, it sits in the underlayment where you cannot see it. Extraction mats and meters show how far it traveled, and swollen boards usually come up.
Rule of thumb from the field: carpet in clean water can often be saved, but the pad underneath is usually thrown out and replaced. Pad is cheap; carpet is not.
Time matters too: clean water left sitting for days in a warm house picks up bacteria, which shrinks the list of what can be saved. It is one more reason to call for extraction right away.

Each material holds water differently, so each one gets a different tool and technique.

The crew makes slow overlapping passes with a weighted tool until the wand stops pulling water. The soaked pad is typically cut out and removed, with the carpet reinstalled after drying.
For a clean-water leak, the crew can pull the carpet off the tack strip, slide air underneath and dry it in place. It keeps a perfectly good carpet from going to the landfill.
Flat panels sealed to the floor pull water up through the seams and out of the boards under vacuum. When caught early, it often stops solid hardwood from cupping.
With click-together planks, water runs underneath and pools on the subfloor out of sight. Crews read moisture across the floor, pull planks where it is wet and extract the subfloor directly.
Furniture and rugs get treated with smaller upholstery tools made for fabric. Wool and handmade rugs usually get sent to a rug cleaning plant for full washing.
After extraction, the tech checks readings across the floor and up the walls to see where water wicked. Those readings tell the crew where the drying equipment should go.
Tell the dispatcher what got wet, what flooring you have and where the water came from. We route you to the nearest independent extraction crew and give you an arrival window.
The crew pulls up with a truck mount or portable extractor, wands, weighted tools and moisture meters.
First the tech identifies the water source and category, measures the wet area and decides what stays, then puts the quote in writing.
When the extraction is finished, you see the final readings, the drying setup and what was removed before you sign off.

The fridge ice-maker line let go overnight and the living room carpet was wet from the kitchen to the far wall. The contractor I was connected with pulled the pad, extracted the carpet with a stand-on tool and saved the carpet itself. There was no musty smell later, which was my biggest worry.
Water from the hall closet in my apartment ran under the laminate before I noticed. Through the referral line we got a crew that metered the floor, lifted the soaked planks and extracted the subfloor.
I ran my wet vac for hours and the carpet was still squishy. The contractor showed up with a truck mount and got more out of that room in a few passes than I did all night.
Our dog knocked the line off the back of the washer and water ran under the hardwood in the hall before we got home. The contractor we reached through the referral line laid suction mats over the boards and ran them for most of the day. The floor cupped a little and then flattened back out as it dried.
Often, if it got wet from a clean source like a supply line or ice-maker and is extracted quickly. The pad below is normally thrown out, since it traps water and smell.
Carpet soaked by sewage or outside floodwater is almost always removed.
A shop vac only pulls from the surface and has a fraction of the lift of a professional truck mount. The pad and subfloor are where most water lives, and a wet vac does not get there.
Pros use weighted tools that press water out of the pad while the extractor pulls it away.
Extraction itself often takes a few hours for a typical room or two. The drying that follows is a separate step and usually runs a few days.
The crew will give you a time estimate after looking at the wet area.
It should not, as long as the wet pad comes out and the carpet is dried fast. A smell usually means water stayed in the pad or subfloor for too long.
You can ask the crew if an antimicrobial treatment makes sense for your floor.
Extraction is the vacuum step that removes liquid water from carpet, pad and flooring. Drying comes next, using dehumidifiers and air movers to remove the moisture that is left.
Good extraction makes drying much shorter.
Because the crews are based near Hydro, the extraction truck does not have far to travel.
For upper-floor apartments and condos, crews bring portable units since a truck hose will not reach. Houses and small storefronts usually get a truck mount parked right outside.

Call and we will connect you with a local extraction crew.
Call +1-877-637-9008The faster the pad and carpet are extracted, the more you save. Call now for a local crew.