Licensed and Insured Independent Pros
Extraction contractors we refer are independent local businesses that carry their own license and insurance. Ask at the door if you want to see the paperwork; good crews keep it in the truck.
Carpet that squishes when you step on it means the pad is full, and no box fan is going to fix that. A proper extractor physically pulls that water out of carpet and pad, which is much faster than waiting for it to evaporate.
Our referral line connects Kenton callers with independent, licensed and insured contractors who run truck-mounted and portable extractors. You get a written quote before the extraction wand ever hits the carpet.

With extraction, the machine and the tool attachment do the heavy lifting, and the right combination saves days of drying.
Extraction contractors we refer are independent local businesses that carry their own license and insurance. Ask at the door if you want to see the paperwork; good crews keep it in the truck.
The estimate spells out square footage extracted, pad removal if needed and any equipment left behind. Many contractors bill the insurer directly once you have a claim number.
Wet pad starts to sour within a day or two, so speed matters more here than almost anywhere. The dispatcher confirms an actual arrival window with a nearby crew before you hang up.
Expect a truck-mounted extractor with serious vacuum lift, and portable units for upper floors and apartments. Weighted and stand-on tools put a person's body weight on the carpet so water is squeezed out of the pad, not just the fibers.
Each gallon removed by the extractor is a gallon that never has to be evaporated and captured by a dehumidifier. Extraction removes water in liquid form, which is many times faster than turning it into vapor with air movers. Skip that step and the drying phase drags on for days longer than it needs to.
A wet vac works on the surface fibers and has nowhere near the suction of a truck-mounted unit. It also cannot reach the pad, which is where most of the water sits. Folks run one all evening and still end up with carpet that squishes.
Think about an ice-maker line behind the fridge that leaked into the living room carpet overnight. That is clean water, so the crew may float the carpet: lift it off the tack strip, pull the soaked pad, extract the carpet in place and set drying underneath it.
Laminate is trickier. In a rental apartment where water seeped under the planks, it hides in the foam underlayment and against the subfloor. Meters and specialty mats show how far it spread, and any planks with swollen edges usually have to come up.
Field rule: clean-water carpet is often saved, while the pad below is usually tossed. Pad costs little to replace compared to carpet.
Time matters too: clean water left sitting for days in a warm house picks up bacteria, which shrinks the list of what can be saved. That is one more reason to get the extractor in early.

Carpet, wood, laminate and upholstery all trap water in their own way, which is why the tool heads change room to room.

The crew makes slow overlapping passes with a weighted tool until the wand stops pulling water. The soaked pad is typically cut out and removed, with the carpet reinstalled after drying.
With clean water, crews often float the carpet: release it from the strip and blow air under it to dry it in place. It keeps a perfectly good carpet from going to the landfill.
Panel mats seal against the wood and draw water up from between the boards and out of the subfloor. When caught early, it often stops solid hardwood from cupping.
Water slips under click-lock planks and sits on the subfloor where you cannot see it. Crews read moisture across the floor, pull planks where it is wet and extract the subfloor directly.
Sofas, chairs and rugs get extracted with smaller hand tools sized for fabric. Wool and handmade rugs often go out to a rug plant for proper washing and drying.
After extraction, the tech checks readings across the floor and up the walls to see where water wicked. That map decides where drying equipment goes next.
Tell the dispatcher what got wet, what flooring you have and where the water came from. We connect you with the closest independent extraction crew and confirm when they will arrive.
Expect extractors, tool heads, meters and hoses, plus a portable unit if you live upstairs.
The tech checks the water category, maps how far it spread and decides what can be saved before writing the quote.
After extraction, the tech takes final readings, sets drying equipment if needed and walks you through what was done.

The fridge ice-maker line let go overnight and the living room carpet was wet from the kitchen to the far wall. The contractor I was connected with pulled the pad, extracted the carpet with a stand-on tool and saved the carpet itself. No smell afterward, which I was worried about.
I rent an apartment and water came in under the laminate from the unit's water heater closet. Through the referral line we got a crew that metered the floor, lifted the soaked planks and extracted the subfloor.
I ran my wet vac for hours and the carpet was still squishy. The extractor the contractor brought pulled more water in a few minutes than I got in an evening.
Our dog knocked the line off the back of the washer and water ran under the hardwood in the hall before we got home. The crew from the referral service set vacuum mats across the wood and ran them for hours. The floor cupped a little and then flattened back out as it dried.
Usually, when the water was clean and the carpet was extracted within a day or so. The pad underneath is usually replaced because it holds water and odor.
If sewage or floodwater soaked it, the carpet generally has to go.
Wet vacs grab surface water but lack the suction to pull water out of the pad. Most of the water sits in the pad and subfloor, which a wet vac cannot reach.
Professional crews pair a powerful extractor with weighted tools that squeeze the pad.
Extraction itself often takes a few hours for a typical room or two. The drying that follows is a separate step and usually runs a few days.
After checking the size of the wet area, the crew can tell you how long it should take.
It should not, as long as the wet pad comes out and the carpet is dried fast. A smell usually means water stayed in the pad or subfloor for too long.
Ask the crew whether an antimicrobial treatment is recommended for your situation.
Extraction is the vacuum step that removes liquid water from carpet, pad and flooring. Drying comes next, using dehumidifiers and air movers to remove the moisture that is left.
Good extraction makes drying much shorter.
Because the crews are based near Kenton, the extraction truck does not have far to travel.
For upper-floor apartments and condos, crews bring portable units since a truck hose will not reach. Single-family homes and storefronts are usually handled with a truck mount parked in the driveway or lot.

Call and we will connect you with a local extraction crew.
Call +1-877-637-9008The faster the pad and carpet are extracted, the more you save. Call now for a local crew.