Licensed and Insured Independent Pros
You are connected with an independent, locally owned outfit that holds its own license and insurance. Ask to see proof of insurance on arrival, and a reputable crew will have it handy.
Carpet that squishes when you step on it means the pad is full, and no box fan is going to fix that. A proper extractor physically pulls that water out of carpet and pad, which is much faster than waiting for it to evaporate.
Our referral line connects Clayton callers with independent, licensed and insured contractors who run truck-mounted and portable extractors. You get a written quote before the extraction wand ever hits the carpet.

Extraction is a pure equipment job: the power of the machine and the right tool head decide how much water comes out.
You are connected with an independent, locally owned outfit that holds its own license and insurance. Ask to see proof of insurance on arrival, and a reputable crew will have it handy.
The estimate spells out square footage extracted, pad removal if needed and any equipment left behind. Many contractors bill the insurer directly once you have a claim number.
Wet pad starts to sour within a day or two, so speed matters more here than almost anywhere. The dispatcher confirms an actual arrival window with a nearby crew before you hang up.
Expect a truck-mounted extractor with serious vacuum lift, and portable units for upper floors and apartments. Stand-on and weighted tools press body weight into the carpet so the pad gives up its water, not only the top fibers.
Every gallon the extractor pulls out is a gallon the dehumidifiers never have to deal with. Pulling water out as liquid is far quicker than waiting for fans to turn it into vapor. Skip that step and the drying phase drags on for days longer than it needs to.
A shop vac falls short because it only pulls from the surface and has a fraction of the lift of a truck mount. It also cannot reach the pad, which is where most of the water sits. Folks run one all evening and still end up with carpet that squishes.
Think about an ice-maker line behind the fridge that leaked into the living room carpet overnight. Since the water is clean, the crew can often float the carpet, which means releasing it from the tack strip, removing the pad and extracting the carpet itself.
Laminate is trickier. In a rental apartment where water seeped under the planks, it hides in the foam underlayment and against the subfloor. Extraction mats and meters show how far it traveled, and swollen boards usually come up.
Rule of thumb from the field: carpet in clean water can often be saved, but the pad underneath is usually thrown out and replaced. Pad is cheap; carpet is not.
Time matters too: clean water left sitting for days in a warm house picks up bacteria, which shrinks the list of what can be saved. That is one more reason to get the extractor in early.

Carpet, wood, laminate and upholstery all trap water in their own way, which is why the tool heads change room to room.

Slow, overlapping passes with a weighted head continue until the clear wand shows almost no water. Wet pad is usually cut out and bagged, then the carpet is relaid once dry.
With clean water, crews often float the carpet: release it from the strip and blow air under it to dry it in place. This saves the carpet and keeps it out of the dumpster.
Panel mats seal against the wood and draw water up from between the boards and out of the subfloor. Caught early, this can keep solid hardwood from cupping badly.
Water slips under click-lock planks and sits on the subfloor where you cannot see it. Crews read moisture across the floor, pull planks where it is wet and extract the subfloor directly.
Sofas, chairs and rugs get extracted with smaller hand tools sized for fabric. Wool and handmade rugs usually get sent to a rug cleaning plant for full washing.
Once the water is out, the tech maps moisture across the floor and along the base of the walls. That map decides where drying equipment goes next.
Let the dispatcher know the flooring type, the size of the wet area and the source of the leak. We route you to the nearest independent extraction crew and give you an arrival window.
The crew pulls up with a truck mount or portable extractor, wands, weighted tools and moisture meters.
First the tech identifies the water source and category, measures the wet area and decides what stays, then puts the quote in writing.
After extraction, the tech takes final readings, sets drying equipment if needed and walks you through what was done.

The fridge ice-maker line let go overnight and the living room carpet was wet from the kitchen to the far wall. The contractor I was connected with pulled the pad, extracted the carpet with a stand-on tool and saved the carpet itself. There was no musty smell later, which was my biggest worry.
Water from the hall closet in my apartment ran under the laminate before I noticed. The crew my landlord and I were connected with found it with a meter, pulled the wet planks and extracted the subfloor.
I spent three hours with my shop vac and the carpet still squished. The extractor the contractor brought pulled more water in a few minutes than I got in an evening.
The washer drain hose came loose and water ran under the hallway hardwood while we were at work. The crew from the referral service set vacuum mats across the wood and ran them for hours. The floor cupped a little and then flattened back out as it dried.
Often, if it got wet from a clean source like a supply line or ice-maker and is extracted quickly. The pad underneath is usually replaced because it holds water and odor.
Carpet soaked by sewage or outside floodwater is almost always removed.
Wet vacs grab surface water but lack the suction to pull water out of the pad. Most of the water sits in the pad and subfloor, which a wet vac cannot reach.
Pros use weighted tools that press water out of the pad while the extractor pulls it away.
Extraction itself often takes a few hours for a typical room or two. Drying afterward is a separate step that can take several days.
After checking the size of the wet area, the crew can tell you how long it should take.
It should not, as long as the wet pad comes out and the carpet is dried fast. Odor usually means water was left in the pad or subfloor too long.
You can ask the crew if an antimicrobial treatment makes sense for your floor.
Extraction is the vacuum step that removes liquid water from carpet, pad and flooring. Drying is what follows, with dehumidifiers and air movers removing what is left behind.
The better the extraction, the shorter the drying phase.
The extraction contractors we refer are local, so the truck mount is not hours away.
For upper-floor apartments and condos, crews bring portable units since a truck hose will not reach. Single-family homes and storefronts are usually handled with a truck mount parked in the driveway or lot.

A dispatcher will route you to a nearby extraction crew.
Call +1-877-637-9008The faster the pad and carpet are extracted, the more you save. Call now for a local crew.