Licensed and Insured Independent Pros
Extraction contractors we refer are independent local businesses that carry their own license and insurance. Ask to see proof of insurance on arrival, and a reputable crew will have it handy.
When carpet squishes under your shoes, the pad below is holding gallons, and fans alone will take ages to pull it out. Real extraction gear pulls water out of carpet, pad and floor seams far faster than any fan can dry it.
Our referral line connects Canton callers with independent, licensed and insured contractors who run truck-mounted and portable extractors. You get a written quote before the extraction wand ever hits the carpet.

With extraction, the machine and the tool attachment do the heavy lifting, and the right combination saves days of drying.
Extraction contractors we refer are independent local businesses that carry their own license and insurance. Ask to see proof of insurance on arrival, and a reputable crew will have it handy.
Expect a written estimate listing square feet of carpet extracted, any pad disposal and equipment rental days. Plenty of them work straight with your adjuster once a claim is open.
Wet pad starts to sour within a day or two, so speed matters more here than almost anywhere. Our dispatcher confirms a real arrival window with a crew near Canton while you are on the phone.
Crews bring truck-mounted units with far more vacuum lift than any rental, plus portable extractors for high-rise and tight units. Stand-on and weighted tools press body weight into the carpet so the pad gives up its water, not only the top fibers.
Every gallon the extractor pulls out is a gallon the dehumidifiers never have to deal with. Extraction removes water in liquid form, which is many times faster than turning it into vapor with air movers. Leave it out and the drying phase stretches for days.
A wet vac works on the surface fibers and has nowhere near the suction of a truck-mounted unit. It also never reaches the pad, and that is where most of the water is hiding. People run one for hours and still have carpet that squishes.
Take a refrigerator ice-maker line that leaked into wall-to-wall carpet overnight. Since the water is clean, the crew can often float the carpet, which means releasing it from the tack strip, removing the pad and extracting the carpet itself.
Laminate is a tougher case: when water runs under the planks in a rental unit, it sits in the underlayment where you cannot see it. Meters and specialty mats show how far it spread, and any planks with swollen edges usually have to come up.
Rule of thumb from the field: carpet in clean water can often be saved, but the pad underneath is usually thrown out and replaced. Pad is cheap; carpet is not.
Water category can also worsen with time. A clean leak that sits for a few days in warm weather starts to grow bacteria, and that changes what can be kept. That is one more reason to get the extractor in early.

Each material holds water differently, so each one gets a different tool and technique.

Slow, overlapping passes with a weighted head continue until the clear wand shows almost no water. Wet pad is usually cut out and bagged, then the carpet is relaid once dry.
With clean water, crews often float the carpet: release it from the strip and blow air under it to dry it in place. This saves the carpet and keeps it out of the dumpster.
Flat panels sealed to the floor pull water up through the seams and out of the boards under vacuum. When caught early, it often stops solid hardwood from cupping.
With click-together planks, water runs underneath and pools on the subfloor out of sight. Crews read moisture across the floor, pull planks where it is wet and extract the subfloor directly.
Furniture and rugs get treated with smaller upholstery tools made for fabric. Wool and handmade rugs often go out to a rug plant for proper washing and drying.
After extraction, the tech checks readings across the floor and up the walls to see where water wicked. Those readings tell the crew where the drying equipment should go.
Let the dispatcher know the flooring type, the size of the wet area and the source of the leak. We connect you with the closest independent extraction crew and confirm when they will arrive.
The crew pulls up with a truck mount or portable extractor, wands, weighted tools and moisture meters.
First the tech identifies the water source and category, measures the wet area and decides what stays, then puts the quote in writing.
After extraction, the tech takes final readings, sets drying equipment if needed and walks you through what was done.

Our ice-maker line leaked overnight and the whole living room carpet was soaked to the wall. The local contractor from the referral line pulled the wet pad, stood on some kind of weighted tool for an hour and kept our carpet. No smell afterward, which I was worried about.
Water from the hall closet in my apartment ran under the laminate before I noticed. Through the referral line we got a crew that metered the floor, lifted the soaked planks and extracted the subfloor.
I ran my wet vac for hours and the carpet was still squishy. The contractor showed up with a truck mount and got more out of that room in a few passes than I did all night.
Our dog knocked the line off the back of the washer and water ran under the hardwood in the hall before we got home. The crew from the referral service set vacuum mats across the wood and ran them for hours. The floor cupped a little and then flattened back out as it dried.
Often, if it got wet from a clean source like a supply line or ice-maker and is extracted quickly. The pad below is normally thrown out, since it traps water and smell.
If sewage or floodwater soaked it, the carpet generally has to go.
A shop vac only pulls from the surface and has a fraction of the lift of a professional truck mount. Most of the water sits in the pad and subfloor, which a wet vac cannot reach.
Pros use weighted tools that press water out of the pad while the extractor pulls it away.
Extraction itself often takes a few hours for a typical room or two. The drying that follows is a separate step and usually runs a few days.
After checking the size of the wet area, the crew can tell you how long it should take.
Not if the pad is removed, the carpet is extracted thoroughly and it dries quickly. Odor usually means water was left in the pad or subfloor too long.
You can ask the crew if an antimicrobial treatment makes sense for your floor.
Extraction physically pulls liquid water out of carpet, pad and floors with powerful vacuums and tools. Drying comes next, using dehumidifiers and air movers to remove the moisture that is left.
Good extraction makes drying much shorter.
The extraction contractors we refer are local, so the truck mount is not hours away.
For upper-floor apartments and condos, crews bring portable units since a truck hose will not reach. Houses and small storefronts usually get a truck mount parked right outside.

Call and we will connect you with a local extraction crew.
Call +1-877-637-9008The faster the pad and carpet are extracted, the more you save. Call now for a local crew.