Licensed and Insured Independent Pros
You are connected with an independent, locally owned outfit that holds its own license and insurance. Ask to see proof of insurance on arrival, and a reputable crew will have it handy.
Carpet that squishes when you step on it means the pad is full, and no box fan is going to fix that. Real extraction gear pulls water out of carpet, pad and floor seams far faster than any fan can dry it.
Our referral line connects Malden callers with independent, licensed and insured contractors who run truck-mounted and portable extractors. The crew quotes the job in writing before the wand touches the floor.

With extraction, the machine and the tool attachment do the heavy lifting, and the right combination saves days of drying.
You are connected with an independent, locally owned outfit that holds its own license and insurance. Ask to see proof of insurance on arrival, and a reputable crew will have it handy.
The estimate spells out square footage extracted, pad removal if needed and any equipment left behind. Plenty of them work straight with your adjuster once a claim is open.
Carpet pad sitting in water begins to smell fast, which makes a quick response the whole ballgame. The dispatcher confirms an actual arrival window with a nearby crew before you hang up.
Expect a truck-mounted extractor with serious vacuum lift, and portable units for upper floors and apartments. Weighted and stand-on tools put a person's body weight on the carpet so water is squeezed out of the pad, not just the fibers.
Each gallon removed by the extractor is a gallon that never has to be evaporated and captured by a dehumidifier. Pulling water out as liquid is far quicker than waiting for fans to turn it into vapor. Skip that step and the drying phase drags on for days longer than it needs to.
A wet vac works on the surface fibers and has nowhere near the suction of a truck-mounted unit. It also cannot reach the pad, which is where most of the water sits. People run one for hours and still have carpet that squishes.
Think about an ice-maker line behind the fridge that leaked into the living room carpet overnight. That is clean water, so the crew may float the carpet: lift it off the tack strip, pull the soaked pad, extract the carpet in place and set drying underneath it.
Laminate is a tougher case: when water runs under the planks in a rental unit, it sits in the underlayment where you cannot see it. Extraction mats and meters show how far it traveled, and swollen boards usually come up.
Field rule: clean-water carpet is often saved, while the pad below is usually tossed. Pad costs little to replace compared to carpet.
Water category can also worsen with time. A clean leak that sits for a few days in warm weather starts to grow bacteria, and that changes what can be kept. That is one more reason to get the extractor in early.

Carpet, wood, laminate and upholstery all trap water in their own way, which is why the tool heads change room to room.

Slow, overlapping passes with a weighted head continue until the clear wand shows almost no water. The soaked pad is typically cut out and removed, with the carpet reinstalled after drying.
With clean water, crews often float the carpet: release it from the strip and blow air under it to dry it in place. This saves the carpet and keeps it out of the dumpster.
Flat panels sealed to the floor pull water up through the seams and out of the boards under vacuum. When caught early, it often stops solid hardwood from cupping.
Water slips under click-lock planks and sits on the subfloor where you cannot see it. Crews read moisture across the floor, pull planks where it is wet and extract the subfloor directly.
Furniture and rugs get treated with smaller upholstery tools made for fabric. Wool and handmade rugs usually get sent to a rug cleaning plant for full washing.
After extraction, the tech checks readings across the floor and up the walls to see where water wicked. Those readings tell the crew where the drying equipment should go.
Let the dispatcher know the flooring type, the size of the wet area and the source of the leak. We route you to the nearest independent extraction crew and give you an arrival window.
The crew pulls up with a truck mount or portable extractor, wands, weighted tools and moisture meters.
First the tech identifies the water source and category, measures the wet area and decides what stays, then puts the quote in writing.
When the extraction is finished, you see the final readings, the drying setup and what was removed before you sign off.

The fridge ice-maker line let go overnight and the living room carpet was wet from the kitchen to the far wall. The local contractor from the referral line pulled the wet pad, stood on some kind of weighted tool for an hour and kept our carpet. No smell afterward, which I was worried about.
Water from the hall closet in my apartment ran under the laminate before I noticed. Through the referral line we got a crew that metered the floor, lifted the soaked planks and extracted the subfloor.
I spent three hours with my shop vac and the carpet still squished. The extractor the contractor brought pulled more water in a few minutes than I got in an evening.
The washer drain hose came loose and water ran under the hallway hardwood while we were at work. The contractor we reached through the referral line laid suction mats over the boards and ran them for most of the day. The boards cupped slightly, then settled flat again once everything was dry.
Often, if it got wet from a clean source like a supply line or ice-maker and is extracted quickly. The pad below is normally thrown out, since it traps water and smell.
Carpet soaked by sewage or outside floodwater is almost always removed.
Wet vacs grab surface water but lack the suction to pull water out of the pad. The pad and subfloor are where most water lives, and a wet vac does not get there.
Professional crews pair a powerful extractor with weighted tools that squeeze the pad.
Extraction itself often takes a few hours for a typical room or two. Drying afterward is a separate step that can take several days.
After checking the size of the wet area, the crew can tell you how long it should take.
It should not, as long as the wet pad comes out and the carpet is dried fast. Odor usually means water was left in the pad or subfloor too long.
Ask the crew whether an antimicrobial treatment is recommended for your situation.
Extraction is the vacuum step that removes liquid water from carpet, pad and flooring. Drying comes next, using dehumidifiers and air movers to remove the moisture that is left.
The better the extraction, the shorter the drying phase.
The extraction contractors we refer are local, so the truck mount is not hours away.
For upper-floor apartments and condos, crews bring portable units since a truck hose will not reach. Single-family homes and storefronts are usually handled with a truck mount parked in the driveway or lot.

A dispatcher will route you to a nearby extraction crew.
Call +1-877-637-9008Quick extraction saves carpet and shortens drying. Call now to reach a local crew.