Licensed and Insured Independent Pros
Extraction contractors we refer are independent local businesses that carry their own license and insurance. Ask at the door if you want to see the paperwork; good crews keep it in the truck.
Carpet that squishes when you step on it means the pad is full, and no box fan is going to fix that. A proper extractor physically pulls that water out of carpet and pad, which is much faster than waiting for it to evaporate.
Our referral line connects Cascade callers with independent, licensed and insured contractors who run truck-mounted and portable extractors. The crew quotes the job in writing before the wand touches the floor.

Extraction is a pure equipment job: the power of the machine and the right tool head decide how much water comes out.
Extraction contractors we refer are independent local businesses that carry their own license and insurance. Ask at the door if you want to see the paperwork; good crews keep it in the truck.
The estimate spells out square footage extracted, pad removal if needed and any equipment left behind. Plenty of them work straight with your adjuster once a claim is open.
Carpet pad sitting in water begins to smell fast, which makes a quick response the whole ballgame. The dispatcher confirms an actual arrival window with a nearby crew before you hang up.
Expect a truck-mounted extractor with serious vacuum lift, and portable units for upper floors and apartments. Weighted and stand-on tools put a person's body weight on the carpet so water is squeezed out of the pad, not just the fibers.
Each gallon removed by the extractor is a gallon that never has to be evaporated and captured by a dehumidifier. Pulling water out as liquid is far quicker than waiting for fans to turn it into vapor. Skip that step and the drying phase drags on for days longer than it needs to.
A shop vac falls short because it only pulls from the surface and has a fraction of the lift of a truck mount. It also cannot reach the pad, which is where most of the water sits. People run one for hours and still have carpet that squishes.
Take a refrigerator ice-maker line that leaked into wall-to-wall carpet overnight. That is clean water, so the crew may float the carpet: lift it off the tack strip, pull the soaked pad, extract the carpet in place and set drying underneath it.
Laminate is trickier. In a rental apartment where water seeped under the planks, it hides in the foam underlayment and against the subfloor. Meters and specialty mats show how far it spread, and any planks with swollen edges usually have to come up.
Field rule: clean-water carpet is often saved, while the pad below is usually tossed. Pad costs little to replace compared to carpet.
Time matters too: clean water left sitting for days in a warm house picks up bacteria, which shrinks the list of what can be saved. That is one more reason to get the extractor in early.

Carpet, wood, laminate and upholstery all trap water in their own way, which is why the tool heads change room to room.

Slow, overlapping passes with a weighted head continue until the clear wand shows almost no water. Wet pad is usually cut out and bagged, then the carpet is relaid once dry.
For a clean-water leak, the crew can pull the carpet off the tack strip, slide air underneath and dry it in place. This saves the carpet and keeps it out of the dumpster.
Flat panels sealed to the floor pull water up through the seams and out of the boards under vacuum. When caught early, it often stops solid hardwood from cupping.
With click-together planks, water runs underneath and pools on the subfloor out of sight. The crew maps the wet area with a meter, lifts planks where needed and extracts the subfloor below.
Furniture and rugs get treated with smaller upholstery tools made for fabric. Wool and handmade rugs often go out to a rug plant for proper washing and drying.
Once the water is out, the tech maps moisture across the floor and along the base of the walls. Those readings tell the crew where the drying equipment should go.
Let the dispatcher know the flooring type, the size of the wet area and the source of the leak. We route you to the nearest independent extraction crew and give you an arrival window.
Expect extractors, tool heads, meters and hoses, plus a portable unit if you live upstairs.
First the tech identifies the water source and category, measures the wet area and decides what stays, then puts the quote in writing.
After extraction, the tech takes final readings, sets drying equipment if needed and walks you through what was done.

The fridge ice-maker line let go overnight and the living room carpet was wet from the kitchen to the far wall. The local contractor from the referral line pulled the wet pad, stood on some kind of weighted tool for an hour and kept our carpet. There was no musty smell later, which was my biggest worry.
I rent an apartment and water came in under the laminate from the unit's water heater closet. Through the referral line we got a crew that metered the floor, lifted the soaked planks and extracted the subfloor.
I spent three hours with my shop vac and the carpet still squished. The contractor showed up with a truck mount and got more out of that room in a few passes than I did all night.
The washer drain hose came loose and water ran under the hallway hardwood while we were at work. The contractor we reached through the referral line laid suction mats over the boards and ran them for most of the day. The boards cupped slightly, then settled flat again once everything was dry.
Often, if it got wet from a clean source like a supply line or ice-maker and is extracted quickly. The pad below is normally thrown out, since it traps water and smell.
If sewage or floodwater soaked it, the carpet generally has to go.
Wet vacs grab surface water but lack the suction to pull water out of the pad. The pad and subfloor are where most water lives, and a wet vac does not get there.
Pros use weighted tools that press water out of the pad while the extractor pulls it away.
For one or two rooms, the extraction often wraps up in a few hours. The drying that follows is a separate step and usually runs a few days.
The crew will give you a time estimate after looking at the wet area.
It should not, as long as the wet pad comes out and the carpet is dried fast. A smell usually means water stayed in the pad or subfloor for too long.
You can ask the crew if an antimicrobial treatment makes sense for your floor.
Extraction is the vacuum step that removes liquid water from carpet, pad and flooring. Drying comes next, using dehumidifiers and air movers to remove the moisture that is left.
The better the extraction, the shorter the drying phase.
The extraction contractors we refer are local, so the truck mount is not hours away.
For upper-floor apartments and condos, crews bring portable units since a truck hose will not reach. Houses and small storefronts usually get a truck mount parked right outside.

A dispatcher will route you to a nearby extraction crew.
Call +1-877-637-9008Quick extraction saves carpet and shortens drying. Call now to reach a local crew.