Licensed and Insured Independent Pros
Extraction contractors we refer are independent local businesses that carry their own license and insurance. Ask to see proof of insurance on arrival, and a reputable crew will have it handy.
If water beads up when you press on the carpet, the pad underneath is soaked and evaporation alone will be painfully slow. Real extraction gear pulls water out of carpet, pad and floor seams far faster than any fan can dry it.
Our referral line connects McSwain callers with independent, licensed and insured contractors who run truck-mounted and portable extractors. The crew quotes the job in writing before the wand touches the floor.

Extraction is a pure equipment job: the power of the machine and the right tool head decide how much water comes out.
Extraction contractors we refer are independent local businesses that carry their own license and insurance. Ask to see proof of insurance on arrival, and a reputable crew will have it handy.
The estimate spells out square footage extracted, pad removal if needed and any equipment left behind. Plenty of them work straight with your adjuster once a claim is open.
Carpet pad sitting in water begins to smell fast, which makes a quick response the whole ballgame. Our dispatcher confirms a real arrival window with a crew near McSwain while you are on the phone.
Expect a truck-mounted extractor with serious vacuum lift, and portable units for upper floors and apartments. Stand-on and weighted tools press body weight into the carpet so the pad gives up its water, not only the top fibers.
Each gallon removed by the extractor is a gallon that never has to be evaporated and captured by a dehumidifier. Extraction removes water in liquid form, which is many times faster than turning it into vapor with air movers. Skip that step and the drying phase drags on for days longer than it needs to.
A shop vac falls short because it only pulls from the surface and has a fraction of the lift of a truck mount. It also cannot reach the pad, which is where most of the water sits. Folks run one all evening and still end up with carpet that squishes.
Take a refrigerator ice-maker line that leaked into wall-to-wall carpet overnight. Since the water is clean, the crew can often float the carpet, which means releasing it from the tack strip, removing the pad and extracting the carpet itself.
Laminate is a tougher case: when water runs under the planks in a rental unit, it sits in the underlayment where you cannot see it. Extraction mats and meters show how far it traveled, and swollen boards usually come up.
Rule of thumb from the field: carpet in clean water can often be saved, but the pad underneath is usually thrown out and replaced. Pad is cheap; carpet is not.
Time matters too: clean water left sitting for days in a warm house picks up bacteria, which shrinks the list of what can be saved. That is one more reason to get the extractor in early.

Each material holds water differently, so each one gets a different tool and technique.

The crew makes slow overlapping passes with a weighted tool until the wand stops pulling water. The soaked pad is typically cut out and removed, with the carpet reinstalled after drying.
With clean water, crews often float the carpet: release it from the strip and blow air under it to dry it in place. This saves the carpet and keeps it out of the dumpster.
Flat panels sealed to the floor pull water up through the seams and out of the boards under vacuum. When caught early, it often stops solid hardwood from cupping.
With click-together planks, water runs underneath and pools on the subfloor out of sight. Crews read moisture across the floor, pull planks where it is wet and extract the subfloor directly.
Furniture and rugs get treated with smaller upholstery tools made for fabric. Wool and handmade rugs usually get sent to a rug cleaning plant for full washing.
Once the water is out, the tech maps moisture across the floor and along the base of the walls. Those readings tell the crew where the drying equipment should go.
Tell the dispatcher what got wet, what flooring you have and where the water came from. We route you to the nearest independent extraction crew and give you an arrival window.
The crew pulls up with a truck mount or portable extractor, wands, weighted tools and moisture meters.
The tech checks the water category, maps how far it spread and decides what can be saved before writing the quote.
After extraction, the tech takes final readings, sets drying equipment if needed and walks you through what was done.

Our ice-maker line leaked overnight and the whole living room carpet was soaked to the wall. The contractor I was connected with pulled the pad, extracted the carpet with a stand-on tool and saved the carpet itself. There was no musty smell later, which was my biggest worry.
Water from the hall closet in my apartment ran under the laminate before I noticed. The crew my landlord and I were connected with found it with a meter, pulled the wet planks and extracted the subfloor.
I spent three hours with my shop vac and the carpet still squished. The contractor showed up with a truck mount and got more out of that room in a few passes than I did all night.
Our dog knocked the line off the back of the washer and water ran under the hardwood in the hall before we got home. The contractor we reached through the referral line laid suction mats over the boards and ran them for most of the day. The floor cupped a little and then flattened back out as it dried.
Often, if it got wet from a clean source like a supply line or ice-maker and is extracted quickly. The pad underneath is usually replaced because it holds water and odor.
If sewage or floodwater soaked it, the carpet generally has to go.
Wet vacs grab surface water but lack the suction to pull water out of the pad. Most of the water sits in the pad and subfloor, which a wet vac cannot reach.
Pros use weighted tools that press water out of the pad while the extractor pulls it away.
For one or two rooms, the extraction often wraps up in a few hours. The drying that follows is a separate step and usually runs a few days.
After checking the size of the wet area, the crew can tell you how long it should take.
Not if the pad is removed, the carpet is extracted thoroughly and it dries quickly. A smell usually means water stayed in the pad or subfloor for too long.
Ask the crew whether an antimicrobial treatment is recommended for your situation.
Extraction is the vacuum step that removes liquid water from carpet, pad and flooring. Drying comes next, using dehumidifiers and air movers to remove the moisture that is left.
Good extraction makes drying much shorter.
The extraction contractors we refer are local, so the truck mount is not hours away.
Upstairs condos and apartments often need portable extractors because hoses cannot reach from the street. Houses and small storefronts usually get a truck mount parked right outside.

Call and we will connect you with a local extraction crew.
Call +1-877-637-9008Quick extraction saves carpet and shortens drying. Call now to reach a local crew.