Licensed and Insured Drying Contractors
Every contractor we refer is an independent local business that carries its own license and insurance. Many train to the IICRC S500 standard for water damage drying; ask your tech about their certifications.
24/7 Drying Line Open
Structural Drying in Clovis, NM
Once the puddles are mopped up, a house can look done while the studs, subfloor and drywall core are still soaked inside. Getting a structure truly dry is a numbers game, measured with meters and humidity readings rather than fingertips.
Call Doral Water Damage and our dispatcher connects you with a licensed, insured independent drying contractor who works near Clovis. Your tech sets dehumidifiers and air movers to a plan, logs readings every day and gives you a written estimate up front.
- Targets set from dry material in the same house
- Daily moisture logs and drying charts
- Licensed, insured independent drying contractors
- Drying in place before tearing anything out
While the drying runs
- Leave every machine on, day and night
- Keep windows and doors closed unless told otherwise
- Keep the heat or AC at the setting your tech gives
- Do not move air movers or dehumidifiers
Why people call for drying
Why Choose Our Specialized Structural Drying Network in Clovis, NM
Proper drying is part science and part routine: read the air, read the materials, adjust, and repeat until the numbers line up. Here is what the independent contractors we refer bring to that work.
Upfront Written Drying Estimates
The estimate lists equipment counts, expected drying days and monitoring visits, so the bill is easy to follow. The moisture log supports every line when the adjuster reviews it.
Fast Response From Nearby Techs
The sooner drying starts, the more drywall, trim and flooring can stay in place instead of being cut out. Our dispatcher confirms a real arrival window with a nearby tech while you are on the line.
Hygrometers, Pin Meters and LGR Units
Expect a thermo-hygrometer for temperature, humidity and GPP, pin and non-invasive meters for framing and drywall, and a thermal camera to track cool, wet areas. Equipment ranges from LGR and desiccant dehumidifiers to wall cavity injection kits and hardwood floor drying mats.
Notes from the drying techs
Dry to the Touch Is Not Dry
Here is a call the dispatch desk gets every week: a leak was fixed, the wall looks fine, but a tech puts a meter on it and it reads high. Drywall paint dries on the surface first and seals moisture inside the gypsum core and the stud behind it. Close that up or hang a picture on it and you can end up with mold you will not see for weeks.
The drying target comes from what techs call the dry standard: readings taken on unaffected drywall, framing or flooring elsewhere in the house. When the wet wall reads within range of that dry standard, it is dry; until then, the equipment keeps running.
Wood floors make the point just as clearly. With a slow leak under a dishwasher, the underside of the boards swells and the edges lift, which is called cupping. Sand it flat too early and it crowns once it dries. Drying mats and steady monitoring can often bring the boards back flat.
The physics in plain words: warm, dry air pulls moisture out of wet materials, and dehumidifiers pull it out of the air. Air movers keep the surface boundary layer moving so evaporation does not stall.
- Relative humidity is how full the air is relative to what it can hold at that temperature
- Grains per pound (GPP) measures how much water is actually in the air, regardless of temperature
- Vapor pressure moves moisture from wetter materials toward drier air
- Dew point is where the air would condense on a cold surface, which matters on slabs and exterior walls
Where drying equipment goes
Structural Drying Work Done by Local Techs
Techs start by rating the job Class 1 through 4, which sets how much dehumidification and airflow it takes.
Mapping Wet Areas Against Dry Readings
The tech maps the wet area with meters and a thermal camera, then takes readings on unaffected material to set the drying goal. Readings are noted on a floor sketch so the same points are checked each visit.
Rating the Loss by Class
Class 1 is a small area with little absorption; Class 4 means dense materials like hardwood, plaster or concrete that hold water deep. The class drives how many dehumidifiers and air movers go in.
- Class 2: whole room, wicking under a foot or two up the walls
- Class 3: wet ceilings, walls and floors from water coming from above
LGR and Desiccant Dehumidifiers
Low grain refrigerant (LGR) units pull moisture down to lower GPP than standard dehumidifiers, which suits most homes. Desiccant units work better in cold spaces and on dense materials like hardwood and concrete.
Wall Cavity Injection Drying
Rather than cutting the wall open, the tech can drill small holes behind the baseboard and inject dry air into the stud bays. For clean water caught early it often saves the wall, and the holes end up behind the baseboard.
Hardwood Floor Drying Mats
Panels sealed to the floor pull air through the boards and the subfloor under vacuum. Wood readings are checked against dry flooring in another room until they line up.
Daily Logs and Drying Charts
Each monitoring visit logs temperature, humidity and GPP in the affected area, outdoors and at the dehumidifier outlet, along with material readings. That chart shows the adjuster the job is drying as planned, and when it is done.
From the first reading to the last
Your Drying Job, From Call to Sign-Off
Call Dispatch and Describe What Got Wet
Tell the dispatcher what kind of water it was, how long ago it happened and which materials got wet. We connect you with the nearest independent drying tech and confirm an arrival window.
Rapid Mobile Arrival With Meters
The tech reads the air inside and outside, then maps moisture through the walls, floors and ceilings. A few readings on unaffected material elsewhere set the drying goal.
Drying Plan and Written Estimate
After rating the loss by class, the tech sorts what dries in place from what must be removed and sizes the equipment to match. You get a written, line-itemed estimate before the machines start.
Daily Checks Until Dry, Then Sign-Off
The tech checks readings every day or so, moves or removes equipment as areas dry, and logs every visit. Once all readings match the dry standard, the gear is picked up and you sign off with the complete log for your claim.
From drying callers
Drying Stories From Our Callers
Our upstairs toilet leaked and the hallway wall looked completely fine a day later. I called the referral line mostly for peace of mind, and the contractor they connected me with put a meter on it and it was soaked behind the paint. They injected air into the wall cavity instead of tearing it out and showed me the readings dropping every day.
A slow leak under our dishwasher made the kitchen oak floor cup. I figured we would need a new floor. My tech set up drying mats and compared the boards to dry flooring in the dining room each visit. It flattened most of the way, and they told us honestly which boards would still need work.
The machines were loud and I wanted to shut them off at night. My tech explained that turning them off lets the moisture rebound and costs you a day of drying. We kept them running and the job wrapped up in about four days.
Common drying questions
Straight Answers About Structural Drying
How long does structural drying take?
Many jobs finish in three to five days, while hardwood, plaster or concrete can stretch that out. The class of the loss, the outdoor humidity and how soon the equipment went in all affect the timing. Your tech can update the estimate as the daily readings come in.
Why do the drying machines have to run 24 hours a day?
The equipment keeps the air drier than the wet materials, which is what pulls moisture out of them. Once the machines stop, the air humidity climbs back up and the materials stop drying or soak some back in.
Can I turn the drying equipment off at night?
It is best not to. Turning the equipment off overnight usually adds days to the job. If noise is a real problem, ask your tech whether a unit can be repositioned; do not move or switch off machines on your own.
How do they know when the structure is completely dry?
Readings on the affected materials are checked against the same material in a dry room, which is the dry standard. Once every point on the moisture log reaches that range, the job is considered dry. The daily log documents it for you and for the insurance adjuster.
How much electricity do drying machines use?
A dehumidifier and several air movers running around the clock will raise the power bill for that period. Many insurers reimburse that added electricity cost on a covered claim, so ask your adjuster and keep your utility bills. Your tech will spread the load across circuits so nothing trips.
Where techs respond
Independent Drying Contractors Serving Clovis
Our network of independent drying techs covers houses, condos and small businesses all over Clovis.
Some callers reach us after another company dried the space and something still smells musty or reads wet. A second set of readings from an independent tech can tell you where things stand.
- Walls and studs
- Cupped wood floors
- Subfloors
- Older plaster
- Ceilings
Talk to a drying dispatcher now
Describe the materials and timing, and we will match you with a nearby independent drying tech.
Call +1-877-637-9008Walls or Floors Still Damp? Call Now
In a few minutes with a meter, a tech can tell you whether the structure is actually dry. One call connects you with an independent drying contractor nearby.
